Doug Fleenor Design - Specifications


	(805) 481-9599

ISOLATORS
Inline isolator
Isolation amplifiers
DIN-rail isolator

SPLITTERS
Standard 3, 5 or 11 output
Enhanced five output
Enhanced wall mount
Bi-directional hub / RDM
Electronic patch bay

SIGNAL ROUTERS
Electronic patch bay
Passive A/B switches

WIRELESS DMX512
Marconi TX
Marconi Splitter
Marconi LV

MERGERS
Enhanced 2,3,4,5 or 6 input
Enhanced wall mount

POWER SUPPLIES
LED300: 24V 300W
LED100: Battery & Wireless
Class 2 Transformer

WALL PLATES
Passive XLR plates
Buffered DMX512 plates

MOUNTING OPTIONS
Rack kits
Product mounted in J-Box

DIMMERS
DMX8DIM - 8 Channel Dimmer

CUSTOM & OEM
Click Here

RELAYS
1 Ch. line voltage
6 Ch. line voltage
2 Ch. low voltage contacts
6 Ch. low voltage contacts

INTERFACES
Analog to DMX 48 channel
  RS-232 to DMX
  DMX to DMX
  DMX to AMX192
DMX to Analog 24 & 96 channel
DMX to CMX / CMX to DMX
  DMX to Strand D54
  DMX to DALI
  DMX to Microplex/LMX/Ultraplex
  DMX to RS-232
  DMX to Solid State Relay 96 Ch.
  DMX iPlayer interface
  DIN-rail mounted
  Pork Chopper - Hog II Overdrive
  Start Code Stripper

CONSOLES
Apathy: Single channel console
  Preset 10 architectural
  Preset 10 architectural 2
  Preset 10 portable
  RAD: Remote Address Device
  Rerun architectural
  Rerun portable
  Rerun rack mount
  Entry Station Two

DMX TESTERS
DMX512 Line Tester
GIZMO: DMX512 test box

OTHER DMX STUFF
XLR Terminator w/ LED
XLR Economy terminator
RJ45 Terminator

Basic Specification
model: Gizmo

Input baud rate:	250 Kb/s
Input circuit:	ESD protected EIA-485 transceiver (LT1785)
Input signal:	3 volts minimum, 12 volts maximum
Input connector:	Male Gold plated 5 pin XLR (Neutrik D-1 series). Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+. Cable check on pin 4 and pin 5
Output isolation:	600 Volts
Output baud rate:	250 Kb/s
Output circuit:	ESD protected EIA-485 transceiver (LT1785)
Output signal:	DMX512-A
Output connector:	Female Gold plated 5 pin XLR (Neutrik D-1 series). Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+ Cable check on pin 4 and pin 5
User interface:	25 button keypad and two line 16 character backlit LCD display
Battery:	Provided with 9 Volt NiMH rechargeable or User provided 9 Volt Alkaline (see "Notes On The Battery")
Wall power supply:	Input: 100 - 240VAC 0.5A Max. 50/60 Hz Output: +15V DC 0.666A Connector: 2.5mm type with the center conductor as positive
Power input:	15VDC 0.075A Connector: 2.5mm type with the center conductor as positive
Color:	Front black anodized, rear red clear powder coat
Size and weight:	Chassis 6.75"l X 3.5"w X 1.4"h, 16 ounces Power supply 2.2"l X 1.9"w X 1.0"h, 5 ounces

Doug Fleenor Design is a proud member of:

Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
USA