dr2
Main image
dr1
(805) 481-9599
ProductsPricingDMX InfoFun StuffContact DFD

ISOLATORS
  DMXOPTO: Inline isolator
  121: Isolation amplifiers
  DINTAP / DININTR: DIN-rail isolator

ETHERNET PRODUCTS
  E2E: Ethernet to Ethernet
  E1REL20A: 1 Ch. Ethernet Relay
  E8ANL-DIN: 8 Ch. Ethernet to Analog
  NODE: Ethernet/DMX Interfaces
  NODE DISCOVERY
  PRE10ETHER-A: Ethernet Preset 10
  ES2ETHER: Ethernet Entry Station Two

SPLITTERS
Splitter Selection Matrix

  123/125/1211: 3, 5 or 11 output

  124: 4 output DMX / RDM splitter
  125EE: Enhanced five output
  125EE-WALL: Enhanced wall mount
  127: 7 output DMX / RDM splitter
  1212: 12 output DMX / RDM splitter on DIN rail

SIGNAL ROUTERS
  RR: Electronic patch bay
  SW: Passive A/B switches

WIRELESS DMX512 W-DMX LOGO
  Marconi TX: Transmitter
  Marconi SP: 3 way splitter
  Marconi LV: Low voltage receiver

MERGERS
  221E: Enhanced 2,3,4,5 or 6 input
  221E-WALL: Enhanced wall mount

POWER SUPPLIES
  LED600: 24V 600W
  LED400: 24V 400W
  LED300: 24V 300W
  LED100: Battery & Wireless
  XFMR: Class 2 Transformer

WALL PLATES
  WP-O/WP-I: Passive XLR plates
  DFDNET: Buffered DMX512 plates

FIXTURES
  EDISON: 25 lamp arrayable

DIMMERS
  DMX8DIM: 8 Channel NEMA1
  DMX12DIM-ELV: 12 Channel
  DMX24DIM: 24 Channel

RELAYS
  DMX1REL20A: 1 Ch. line voltage
  DMX6REL15A/-30A: 6 Ch. line voltage
  DMX2REL5A: 2 Ch. low voltage
  DMX6REL1A: 6 Ch. low voltage
  E1REL20A: Ethernet Relay

INTERFACES
  Analog to DMX 48 channel
  RS-232 to DMX
  DMXDECELERATORII
  DMX to DMX
  DMX to AMX192 192 Ch.
  DMX to Analog 12 channel
  DMX to Analog 96 channel
  DMX to CMX / CMX to DMX
  DMX to Strand D54
  DMX to DALI
  DMX to Microplex/LMX/Ultraplex
  DMX to Solid State Relay 96 Ch.
  DMX iPlayer interface
  E8ANL-DIN: 8 Ch. Ethernet to Analog
  Fire Alarm Interface

CONSOLES
  APATHY: Single channel console
  COLORWHEEL
  PRESET 8 - DMX Snapshot Console
  PRESET 10 - DMX Snapshot Console
     PRESET 10 QUATTRO - 4 Universe
  PRE10-A2: Preset 10 Architectural 2
  PRESET 12 - DMX Snapshot Console
   PRESET 18 - DMX Snapshot Console
  PRE10ETHER-A: Ethernet Preset 10
  RAD: RDM Address Device
  RERUN - DMX Recorder
  ES2: Entry Station Two
  ES2ETHER: Ethernet Entry Station Two

DMX TESTERS
  DMXdoohickey
  DMXTSTR: DMX512 line tester
  GIZMO: DMX512 test box

OTHER DMX STUFF
  TERM: XLR Terminator w/ LED
  T2: XLR Economy terminator
  T-45: RJ45 Terminator

MOUNTING OPTIONS
  RK: Rack Kits
  JBOX: Product mounted in J-Box

CUSTOM & OEM
  Click Here

Basic Specification
model: 127

Port circuit: EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data

(Slew-rate-limited drivers minimize EMI and reduce reflections caused by improperly terminated cables)

Input signal: 0.2 volts minimum, 12 volts maximum
Output signal: 1.5 volts (minimum) into 120 Ohm Termination
Connectors: Gold plated 5 pin XLR (typically one male, seven female),
Terminal Blocks Optional
Port protection: ±60V continuous, ±15KV transient
Isolation: 600 volts
Power input: 100 to 240 VAC 50/60 Hz, ½ Amp
Color: Front, Back: Black
Top, Bottom, Sides: Silver Hammertone
Size & weight: 6.5" deep, 1.7" high, 16.5" wide 4.5 pounds
(19" rack adapter available).

Doug Fleenor Design is a proud member of:

TEA