| Input signal: |
250 Kilobaud, 0.2 volts minimum, 12 volts maximum. |
| Input circuit: |
EIA-485 receiver with two 100 ohm PTC self resetting fuses, four low capacitance transient suppression diodes. |
| Input connector: |
Gold plated 5 pin male XLR (Neutrik D-1 series) 3 pin optional. |
| Input pass through: |
Gold plated 5 pin female XLR (Neutrik D-1 series). All pins are wired through. |
| Power input: |
120 volts, 50/60 hertz, 12 watts.
(240 Volt Optional) |
| Output connection:
|
(2) Gold Plated 6 pin male XLR (Neutrik D-1 series).
| Outside Connector |
Inside Connector |
| Pins 1/2 Relay 1 normally open |
Relay 4 normally open |
| Pins 3/4 Relay 2 normally open |
Relay 5 normally open |
| Pins 5/6 Relay 3 normally open |
Relay 6 normally open |
|
| Output rating: |
1A 30VDC |
| Color: |
Black front, back, top, and sides. Clear iridite aluminum bottom chassis. |
| Size and weight: |
9" deep, 1.6" high, 5.6" wide, 2.5 pounds
(19" rack adapter available) |
| Warranty: |
Five years on defects in manufacturing. Output device is not warranted against abuse. |
