 |
 |
 |
(805) 481-9599 |
||
     |
||
Inline isolator
Isolation amplifiers
DIN-rail isolator
SPLITTERS
Standard 3, 5 or 11 output
Enhanced five output
Enhanced wall mount
Bi-directional hub / RDM
Electronic patch bay
SIGNAL ROUTERS
Electronic patch bay
Passive A/B switches
WIRELESS DMX512 
Marconi TX
Marconi Splitter
Marconi LV
MERGERS
Enhanced 2,3,4,5 or 6 input
Enhanced wall mount
POWER SUPPLIES
LED300: 24V 300W
LED100: Battery & Wireless
Class 2 Transformer
WALL PLATES
Passive XLR plates
Buffered DMX512 plates
MOUNTING OPTIONS
Rack kits
Product mounted in J-Box
DIMMERS
DMX8DIM - 8 Channel Dimmer
1 Ch. line voltage
6 Ch. line voltage
2 Ch. low voltage contacts
6 Ch. low voltage contacts
INTERFACES
Analog to DMX 48 channel
RS-232 to DMX
DMX to DMX
DMX to AMX192
DMX to Analog 24 & 96 channel
DMX to CMX / CMX to DMX
DMX to Strand D54
DMX to DALI
DMX to Microplex/LMX/Ultraplex
DMX to RS-232
DMX to Solid State Relay 96 Ch.
DMX iPlayer interface
DIN-rail mounted
Pork Chopper - Hog II Overdrive
Start Code Stripper
CONSOLES
Apathy: Single channel console
Preset 10 architectural
Preset 10 architectural 2
Preset 10 portable
RAD: Remote Address Device
Rerun architectural
Rerun portable
Rerun rack mount
Entry Station Two
DMX TESTERS
DMX512 Line Tester
GIZMO: DMX512 test box
OTHER DMX STUFF
XLR Terminator w/ LED
XLR Economy terminator
RJ45 Terminator
Basic Specification
model: DMX2DALI
| DMX Input signal: | 250 Kilobaud, 0.2 volts minimum, 12 volts maximum | |||
| DMX Input circuit: | ESD protected EIA-485 transceiver (LT1785) | |||
| DMX Input connector: | Three-position two-part terminal block | |||
| Option jumpers: | INSTALLED | REMOVED | ||
| JP1 | DMX times out in 1 second (Default) | Hold last look | ||
| JP2 | Normal addressing (Default) | 1 channel broadcast mode | ||
| JP3 | Unused | Unused | ||
| Output circuit: | DALI compliant 16V (nominal) 250ma | |||
| Output connectors: | Three-position two-part terminal block | |||
| Output Pinout: |
Pin 1 = Common |
|||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | |||
| Color: |
Top, bottom and sides: Silver hammer tone. |
|||
| Size and weight: | 6.5" deep, 1.7" high, 8" wide, 2.7 pounds (19" rack adapter available) | |||
Doug Fleenor Design is a proud member of:
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
USA