The input circuit does not meet DMX512 specifications.
The output circuit meets or exceeds DMX512 requirements. |
| Input circuit: |
A 6N137 Optical Coupler with series 560 Ohm resistor between pins 2 and 3. Pin 1 is not connected. |
| Input signal: |
3 volts minimum, 12 volts maximum |
| Output circuit: |
EIA-485 driver |
| Connectors: |
Switchcraft 5 pin "XLR" style |
| Isolation: |
2500 volt optical coupler |
| Power input: |
100 - 240Volts, 50/60 Hertz, 5 Watts |
| Color: |
Silver connector shell with white plastic label |
| Weight: |
0.8 pounds |
