ENTRY STATION TWO

model: ES2
technical data sheet

The Entry Station Two is a simplified entry station with two user assignable buttons. The buttons can be associated with any preset on the master. Presets are recalled by pressing one of the buttons.

Entry Station Two is integrated as a slave in systems with master and power supply. The solid aluminum faceplate is designed to install over a standard single gang electrical box. Connections to the Entry Station Two are power (2 wires) and DMX512 (3 wires). Power for the Entry Station Two can be supplied from a variety of sources, including a 10V class 2 "doorbell" transformer.

Note: The ES2 is a slave station only. It must be used in conjunction with a Preset 10 or Rerun operating as a master station.
SPECIFICATIONS
Connector:

Phoenix Contact MSTB series 5 position two part terminal block
Model: MSTB 2,5/5-ST-5,08 Order Number 17 57 04 8
Connector pin out:

1 (C) DMX512 common
2 ( -) DMX512 data -
3 (+) DMX512 data +
4 (C) Supply common (internally tied to pin1)
5 (V) Supply voltage "hot"
Input/Output circuit:

ESD protected EIA-485 transceiver (LT1785)
Indicators:

Two green preset indicator LEDs
One bi-color Lockout (red), Time (yellow) & Inactive (green)

User controls:

Two preset push buttons
Option jumpers: When removed sets preset button address
Power input:

9 to 24 volts DC or 6 to 16 volts AC / 200mA per station
(A 10 volt class 2 "doorbell" transformer is recommended for fixed installations)
Color: Black anodized with optional laser engraving
Size :

Face Plate: 4.5"h x 2.75"w x 0.2"d
Face Plate Rear Inset: 4.15"h x 2.4"w x 0.1"d
Electrical Box Minimum Inside Dimensions: 3.5"h x 2.1"w x 1.25"d
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
(805) 481-9599 voice and FAX
(888) 4-DMX512 toll free
www.dfd.com