Fully Isolated Bi-Directional DMX Hub
model: BIDI8
technical data sheet
model: BIDI8
technical data sheet
|
|
The DMX Hub offers isolation and signal buffering for bi-directional communication on a single pair of wires using pins 2 and 3 of a traditional DMX512 data link. The hub differs from an opto-splitter in that any of the eight ports can receive data, with the seven remaining ports re-transmitting that data.
Each of the eight ports offers fully bi-directional optical isolation, fault protection to ±60V, and transient protection to ±15KV. The DMX hub is protocol independent, and currently supports equipment from High End Systems.
Other features include a universal power supply, optional terminal block connectors, gold plated XLR connectors (Neutrik), and a rugged tabletop, truss, or rack mountable enclosure.
| Port circuit: | EIA-485 transceiver with 120 ohm fail safe termination between +Data and -Data |
| Input signal: | 0.2 volts minimum, 12 volts maximum |
| Output signal: | 1.5 volts (minimum) into 120 Ohm Termination |
| Connectors: | Gold plated 5 pin XLR (typically one male, seven female), Terminal Blocks Optional |
| Port protection: | ±60V continuous, ±15KV transient |
| Isolation: | 600 volts |
| Power input: | 100 to 240 VAC 50/60 Hz, ½ Amp |
| Color: | Front, Back: Black Top, Bottom, Sides: Silver Hammertone |
| Size & Weight: | 6.5" deep, 1.7" high, 16.5" wide 4.5 pounds |
| Doug Fleenor Design, Inc. 396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 voice and FAX (888) 4-DMX512 toll free www.dfd.com |