All connectors feature gold plated contacts. The DMX512 input is received via 5 pin male XLR connector. Microplex output is via a 3 pin female XLR connector. A "pass-thru" 5 pin female XLR is also provided for the DMX signal. LED indicators display DMX input signal, power and a Mimic of Microplex channel one. A three digit thumbwheel switch is provided to set the starting address. A test feature allows bringing any output to full by setting the front panel switch to 601 - 628.

SPECIFICATION

Input signal:	250 Kilobaud, 0.2 volts minimum, 12 volts maximum
Input circuit:	ESD protected EIA-485 transceiver (LT1785)
Input connector:	Gold plated 5 pin male (Neutrik D-1 series)
Input pass through:	Gold plated 5 pin female (Neutrik D-1 series) All five pins are passed through
Option jumpers:		INSTALLED	REMOVED
	JP1	DMX times out in 1 second (Default)	Hold last look
	JP2	64 Channel Output (Default)	128 Channel Output
	JP3	Fast Output (Default)	Slow Output
Output signal:		FAST	SLOW
	64 Channel	70 Hertz Output	37 Hertz Output
	128 Channel	38 Hertz Output	20 Hertz Output
Output circuit:	Hi-speed operational amplifier (LF347)
Output connector:	Gold plated 3 pin female (Neutrik D-1 series)
Output Pinout:	Pin 1 = common Pin 2 = N/C Pin 3 = signal
Power input:	100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional)
Color:	Top, bottom and sides: Silver hammer tone. Front and back: Black.
Size and weight:	6.5" deep, 1.7" high, 6.5" wide, 2.7 pounds (19" rack adapter available)

Doug Fleenor Design, Inc. 396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 voice and FAX (888) 4-DMX512 toll free www.dfd.com