DMX512 to D54
model: DMX2D54
technical data sheet
model: DMX2D54
technical data sheet
|
|
The DMX to D54 interface is capable of converting DMX512 to 384 channels of Strand D54. All connectors feature gold plated contacts. The DMX512 input is received via 5 pin male XLR connector. The Strand D54 output is via a 3 pin female XLR connector. A "pass-thru" 5 pin female XLR is also provided for the DMX signal. LED indicators display DMX input signal, power and a Mimic of Strand D54 channel one. A three digit thumbwheel switch is provided to set the starting address. A test feature allows bringing any output to full by setting the front panel switch to 601 - 984. |
SPECIFICATION
| Input signal: | 250 Kilobaud, 0.2 volts minimum, 12 volts maximum | |||
| Input circuit: | ESD protected EIA-485 transceiver (LT1785) | |||
| Input connector: | Gold plated 5 pin male (Neutrik D-1 series) | |||
| Input pass through: | Gold plated 5 pin female (Neutrik D-1 series) All five pins are passed through |
|||
| Option jumpers: | INSTALLED | REMOVED | ||
| JP1 | DMX times out in 1 second (Default) | Hold last look | ||
| JP2 | N/A | |||
| JP3 | Fast Output (Default) | Slow Output | ||
| Output signal: | FAST | SLOW | ||
| 384 Channel | 33 Hertz Output | 14 Hertz Output | ||
| Output circuit: | Hi-speed operational amplifier (LF347) | |||
| Output connector: | Gold plated 3 pin female (Neutrik D-1 series) | |||
| Output Pinout: |
Pin 1 = common |
|||
| Power input: | 100 - 120 volts, 50/60 hertz, 12 watts (208 - 240 volt optional) | |||
| Color: |
Top, bottom and sides: Silver hammer tone. |
|||
| Size and weight: | 6.5" deep, 1.7" high, 6.5" wide, 2.7 pounds (19" rack adapter available) | |||
| Doug Fleenor Design, Inc. 396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 voice and FAX (888) 4-DMX512 toll free www.dfd.com |
