 |
 |
 |
||
 |
 |
|
||
|
|
|
||
|
|
|
||
Basic Specification
|
| Input baud rate: | 250 Kb/s |
| Input circuit: | ESD protected EIA-485 transceiver (LT1785) |
| Input signal: | 3 volts minimum, 12 volts maximum |
| Input connectors: |
Gold plated 5 pin Neutrik D-1. |
| Through connector: | Gold plated female 5 pin XLR (Neutrik D-1 series). All pins wired through. |
| DMX profile: | Per customer's specifications |
| Output baud rate: | Per customer's specifications |
| Output circuit: | RS-232 driver (MAX232) Outputs are short circuit protected but not over voltage protected. |
| Output signal: | RS-232 driver yields an approximate +/- 10 volt signal |
| Output connector: | DB9 (male) Pin 2 = Receive, Pin 3 = Transmit, Pin 5 = signal ground. (straight DB9 Male to Female, cable provided) |
| User interface: | Start address set via a three digit thumbwheel switch |
| Indicators: | Red power LED, Green DMX signal LED, Green RS-232 transmit LED |
| Power input: | Universal power supply 100 - 240VAC, 50/60 hertz, 5 watts |
| Color: | Black anodized |
| Size and weight: |
Chassis 5.3" X 3.2"w X 1.8"h, 12 ounces Power supply 2.2"l X 1.9"w X 1.0"h, 5 ounces |
